nowbotfaq

Manual emisora jr 9 XII.1.MACGREGOR INDUSTRIESInstruction ManualMacGregor IndustriesPCM9XII.JR PROPOPCM9XIIMacGregor IndustriesMacGregor Industries wish to thank Horizon Hobbies for their permission to use sections of theirXP-9303 Manuals in the writing of this PCM9XII Manual. MacGregor Industries Ltd.

• Nick's Jr Burgers And Gyros
• Jr 770 Gyro

Nick's Jr Burgers And Gyros

Hi, I am setting up a JR g490t gyro (g500t) for a Raptor 30v2 with a JR378 radio. Now here is my questions - 1. In the Initial Transmitter Settings section the it show the Dual Rates Hover Mode/Low Rate 80% and Stunt Mode/High Rate 100%.

Jr 770 Gyro

Just to be sure does this mean if you are using a High rate servo like the JR 8700 you must set the Dual Rates to 100% on the Rudder Dual Rate switch of both positions? How do I know if I am in HH or Rate mode? See that on the JR 378 radio the Rudder D/r and AUX2 is the same switch, should I use the Gyro fuction in the radio for remote gain or should I use the Gear channel?Thanks for your help!!! I have been to raptortechnique - there is a setup with a Futaba radio and JR500t gyro but as I only know JR settings, I have difficulty understanding the Futaba terminology. Let me put it this way - Micheal from raptortechnique suggested using the Gear channel for remote gain but as my radio has the Remote Gain function I preferre to use AUX2. One more thing, if I move the rudder stick left the rudder servo stop rotating halfway to full left rudder and same to the right. The limiter pot on the gyro is fully open.

Is this normal? And also If I move the Rudder Left or Right stick fully Left or Right quickly the servo is very twichy (moving around) but If I give left or right rudder stick but slowly it is OK.