nowbotfaq

• Install Bin File Windows

. Save the.zip to a location of your choice on your hard disk. Extract (unzip) the firmware.bin file from the.zip file.

Take note of the location you've chosen for the extracted.bin file. Launch Streets & Trips 2008 Connected Services Edition. Plug in your MSN Direct Receiver. Either detect the receiver or ensure that Streets & Trips MSN Direct receiver COM port setting is correct. In case the receiver cannot be detected, click Tools, then click Options, and then select the Connected Services tab. Click on the Configure MSN Direct Receiver button. Select the same COM port that is reflected in the Windows Device Manager and then click OK to save the COM port setting before proceeding.

If the receiver is successfully detected or the MSN Direct receiver COM port setting is set properly in Streets & Trips then click Tools, then click Options, and then select the Connected Services tab. Click on the Configure MSN Direct Receiver button.Click Update Firmware. Select the firmware update.bin file.The file will be validated and uploaded to the receiver.If the upload is successful, the receiver will return to normal after several minutes and connected services will resume.If the upload is unsuccessful, ensure that the cable is connected securely and start the update process again.Note that the file upload will take several minutes. It is important to not disconnect the receiver during the firmware upload.

HelloWe currently have ESXi 5.1 installed onto an IBM HS23 Blade Server. I need to upgrade the internal Raid Card's bios and firmware.When I look at the IBM website I have downloaded the correct file:'ibmfwmpt2sashs23-1.15 linux32-6 4.bin' which it states is for vmware.I copy the file to either the root or the tmp directory of the host.

Install Bin File Windows

Rhino 5 beta. I then use the command chmod +x to make the file executable, and then run the file with the -s extension.I receive an error message stating:/tmp #./ibmfwmpt2sashs23-1.15 linux32- 64.bin -sUser authority level is not sufficientEncountered mmap function error 22, User authority level may not be sufficientThis update is not meant for this system.What am I doing wrong? I am connecting to the host using putty and under root userThanks in advance.